1. Switches,
Indicators and connectors of PC: Identification of front panel indicators and
switches in a computer system of table top/ tower case model and also
identification of rear side connectors.
2. PC
system layout: Draw a Computer system layout and Mark the positions of SMPS,
Mother Board, FDD, HDD, and CD-Drive/DVD-Drive add on cards in table top /
tower model systems.
3. Mother
Board Layout: Draw the layout of Pentium IV or Pentium Dual core or Pentium
Core2 DUO mother board and mark Processor, Chip set ICs. RAM, Cache, Xtal,
cooling fan, I/O slots and I/O ports and various jumper settings.
4. CMOS
Setup Program: 1. Changing the Standard settings 2. Changing advanced settings
(BIOS and Chipset features)
5. Installation
of FDD: 1. Install and configure an FDD in a computer system. 2. Floppy drive
diagnostics/servicing.
6. USB
pen drives and I-pods.
1. Connect and enable a pen drive or I-pod in a PC.
2. Format the pen drive or I-pod.
3. Copy files and folders from pen drive I-pod to HDD.
4. Copy files and folders from HDD to pen drive or I-pod.
1. Connect and enable a pen drive or I-pod in a PC.
2. Format the pen drive or I-pod.
3. Copy files and folders from pen drive I-pod to HDD.
4. Copy files and folders from HDD to pen drive or I-pod.
7. HDD
Installation:
1. Install the given HDD.
2. Configure in CMOS-Setup program.
3. Partition the HDD using fdisk.
4. Format the Partitions.
1. Install the given HDD.
2. Configure in CMOS-Setup program.
3. Partition the HDD using fdisk.
4. Format the Partitions.
8. Printer
Installation & Troubleshooting:
1. Installing and checking a Dot-Matrix Printer.
2. Installing and checking an Ink jet / Laser Printer.
3.Possible problems and troubleshooting.
1. Installing and checking a Dot-Matrix Printer.
2. Installing and checking an Ink jet / Laser Printer.
3.Possible problems and troubleshooting.
9. Modem
Installation:
1. Install and configure a Modem in a windows PC.
2. Check the working condition of modem with PC.
1. Install and configure a Modem in a windows PC.
2. Check the working condition of modem with PC.
10. DVD
Multi-recorder drive installation:
1. Install a DVD Multi-recorder drive in a PC.
2 Configure using device driver.
3. Check the read / write operation using a cd / dvd.
1. Install a DVD Multi-recorder drive in a PC.
2 Configure using device driver.
3. Check the read / write operation using a cd / dvd.
11. Installation
of Scanner:
1. Connect the given scanner with a PC.
2. Configure the scanner with driver.
3. Check the scanner by scanning a page / a portion in a page.
1. Connect the given scanner with a PC.
2. Configure the scanner with driver.
3. Check the scanner by scanning a page / a portion in a page.
12. Familiarize
: Scandisk, recent Anti-virus software and recent PC Diagnostic software.
13. Assembling
a PC: Assemble a Pentium IV or Pentium Dual Core Pentium Core2 Duo system with
necessary peripherals and check the working condition of the PC.
14. Install
and Configure Windows NT2003 operating system in a PC.
15. Construct
Network by connecting one or two computer with a Windows NT2003 Server.
16. Install
and Configure LINUX operating system in a PC.
17. Construct
Network by connecting one or two computer with a LINUX Server.
18. Configure
the network for an Internet server.
19. Add
/ Remove devices using Hardware Wizard.
20. Add
and Manage User Profile, Set permission to the users both in Windows NT 2003/
LINUX.
EQUIPMENT REQUIRED
|
Sno
|
Name of the Equipments
|
Range
|
Required Nos.
|
|
1
|
Pentium IV
|
5
|
|
|
2
|
Pentium Dual Core
|
2
|
|
|
3
|
IPod
|
4
|
|
|
4
|
USB Pen drive
|
4
|
|
|
5
|
Printer Inkjet / Laser
|
2
|
|
|
6
|
DVD RW
|
5
|
0 comments:
Post a Comment